Methods to save electricity in an apartment or house

How to save electricity at home or in an apartment? Probably not, those who do not think about it. Does not make sense to pay more for electricity, if it does not get any extra benefits in return.

Let us not forget that for the moment, the tendency of increase in tariffs for utilities. If this is so, then why not think about how to save money family budget. In addition, this increases the cost of services for electricity, which is growing day by day.

Let us not forget the fact that the conservation of natural resources it is also necessary in order to protect the environment. If we all spend a lot of electricity, the ecological system on the planet is not worth the download.

Studies have shown that in Europe, people want to protect nature in its original form. Each individual needs to make their own action plan. And then a receipt for payment is significantly a smaller amount.

IMPORTANT! We should follow their example. Usually there is a simple, but highly effective method to significantly save on electricity. If you follow these rules, energy efficiency, we can optimize the cost of utility payments.

Devices to save energy

Devices to save energy

If you do not use special devices, which are sold in shops and outlets worldwide network, it is possible to reduce several times the cost of electricity.

Modern technologies are developing so fast, that today there are already devices that can be used to obtain significant energy savings. These wonders of technology created specifically to reduce the electricity bills. Through these devices it is possible to achieve energy savings of 8-10 times.

ENERGY SAVING LAMP

This is one of the most effective measures to reduce the cost of electricity. Lamps of this type is installed instead of the standard lamp, which is a common base. We emphasize that the purchase of energy-efficient lamps cost more than to buy a lamp. However, funds paid out quickly. Only 1-2 months.

The most efficient kind of energy-saving lamps are LED (leds) or fluorescent lamps. They are compared to a standard bulb, on average 5-6 times less consume electricity. Also note that these lamps have great luminous efficiency. As a result, they offer significant energy savings

There is a good reason to replace the lamp in all areas. If this is not immediately available, then you need to replace serial. Initially, the room where you spend the most time.

ENERGY SAVING DEVICE

ENERGY SAVING DEVICE

The purpose of such devices is to save electricity and to convert reactive energy active. As a result, reduce the consumption of electric power of the nominal figures show that about 40-50 percent.

Energy-saving device, if intelligently applied, gives the opportunity to avoid the energy losses that occur online. They are also called sensors to save energy.

Suppliers of such devices promise, that the device provides the opportunity to cut costs. At least 30%. However, such a measure can only be achieved, when properly use the device.

To use the device, you can save power is easy. You just need to connect it to the outlet, and the nearest counter. Then the unit covers the whole house.

According to the producers the price of electricity has been reduced to:

1. TV, heater, iron, stove, or 45 percent;
2. Refrigerator – 40%;
3. Kettle, toaster, coffee maker – 30%.

Circuit BREAKERS

Their purpose is to make enable or disable lighting in any room program mode. The essence of his work is the program of a power outage for a certain period.

Typically, the response time of the device series of the manufacturer. And the average is 15-20 seconds.

IMPORTANT! The breaker trips because there is installed a special device and a motion sensor. Note, often these devices are microphones. And they are involved in a particular sound. You can also install obscure switches, which react as soon as darkness falls.

The sensor reacts immediately when there is the slightest sound or movement, accompanied by fluctuations and noise. When the device is programmed, and it is clearly specified, so the switch can reduce energy consumption in the room where it is installed. And it is on average 25-30 percent less!

Devices that save electricity to a private house

save electricity to a private house

To save energy in a house to allow the extra equipment. The most common types we now describe.

Solar panels

People, the acute problem of saving electricity to a private house, first of all, think about how to insulate the space. In this case, the solar panels can become a kind of lifesaver.

Today none of us are any obstacles to collect and use an independent source of electricity, which works on solar batteries. If to call things scientifically, it is a photovoltaic panel.

The composition of solar panels – a set of solar cells, i.e., photoelectric converters. They are directly involved in the conversion of solar energy into electrical energy. The lion's share of solar cells are made from silicon, and it is notoriously expensive.

To install these designs, you will need to pay a lot. However, the purchase, as they say, will pay off handsomely. And fast enough. Pay for such devices is expensive, but the time will come when you will be well compensated, because you have free electricity. All, we stress that solar panels are an environmentally friendly source of energy.

THERMOSTAT

In that house, which use a boiler to heat water or heating can achieve energy savings through thermostat. Savings may be different. It depends on what kind of water heater installed in the house.

IMPORTANT! In any case, the thermostat is good, because you can define the selection function of temperature. And then at this temperature the device is switched off. To get back all the money you used to purchase the equipment, usually over a few heating seasons. They are representative of appearance. They are small in size. Can fit into any decor.

How to save electricity to a private house

save electricity to a private house

Private house with facilities and equipment that consume electrical energy, a lot. More of them than in the apartment. How to achieve the savings in this case? It is not so difficult as it seems at first. We can assure you that everyone has the ability to effortlessly make a smaller amount, billing to payment.

Next, we present rules that must be followed.

If possible, take care of the land done manually. Tillers plowing the land, of course, possible to use. But just in case, if suddenly there is a lot of work. It is always a good opportunity to save a certain amount of funds.

Heating equipment, like boilers, should be installed close to sources of supply resources. This means that it is better when the water heaters are located directly next to the cranes and boilers close to the source, the transport gas flow.

If you need to buy a lantern to illuminate the yard, choose those that are powered by solar panels. They offer significant savings in the family budget.

In order to save electricity, it is necessary to control the quality of the wiring in a private home. Since the space is wide enough, it does not close the leakage of electricity through that the wiring is faulty.

General recommendations energy saving

General recommendations energy saving

Immediately, we emphasize that it is possible to significantly reduce power consumption, if you properly use household appliances. In the special account are devices, such as personal computers, refrigerators, washing machines, electric cookers, which have high energy consumption.

You can save electricity, if you buy appliances with energy class a+, A and A+++. Note, however, that savings can be achieved on average, 25-35% of total electricity consumption, but it depends on what model device you have chosen, and who is the manufacturer.

Always check whether the devices are in sockets. If they are connected, but does not work, it causes unnecessary energy consumption. Remember that even a kettle, if it was left connected to the supply source of electricity, the more kilowatts that are consumed.

If you are not working on your computer or laptop, switch off the device. Remember that even in sleep mode the device takes power resource. And at high speed. Studies have shown that only the monthly payment for electricity is lower. About 15 per cent.

Wash linens and clothes do it only when the device is fully charged. It is very important to choose the best program. Then you will succeed and linen to wash, and electricity costs reduced. After all, the space, soaking and washing at a high temperature requires a lot of electricity. Especially for heating water.

The refrigerator is one of the most powerful equipment in the kitchen among all home appliances. And because it consumes more electricity. But because the refrigerator requires special care. You should open it only when necessary. After all, when you open the refrigerator, he took a cooling electrical energy of at least 5% more.

IMPORTANT! Remember this rule. If you cook food in a microwave oven, you can always spend less online than if you cook it in the oven device.

Before leaving, extinguish the light! Develop the habit and you start to see savings immediately.

If you do not insulate the space of the apartment, you can save significant amounts of funds do not need to use any heating devices.

Correctly use the charger. In this case, you must be reduce the total energy consumption of the apartment or house. An average of three to five percent. Methods to save electricity for charging devices is simple. After all, there is a need to ensure that it is reasonable to apply them. For example, when the device is fully charged, so you need without wasting time, unplug it from the mains.

Each of these methods, you can accept. Choose what you like.